Maytag Refrigerator Alarm [Problems & Solutions]

The alarm on a refrigerator alerts you to faults and minor errors. If a Maytag refrigerator alarm goes off, it is crucial to find out why and fix it.

Maytag refrigerator alarm

Maytag Refrigerator Door Alarm Light Blinking – What to Do

The door alarm light will blink only if the door is open or not properly shut. If you had to leave the door open for a while, the door alarm would beep every two minutes while the Door Ajar icon would blink. Press any button on the refrigerator’s control panel to stop the alarm temporarily, but the icon will keep blinking until you shut the door.

When shut, the door must touch the door switch. Otherwise, the door ajar icon on the control panel will become lit. Something may be blocking the door’s path, keeping it from fully closing. Open the refrigerator door again and check the shelves, racks, and bins to see if any are sticking out. Also, ensure all the items in the refrigerator are correctly stacked to prevent an overflow.

Furthermore, check the door seal; a weak or dirty seal keeps the door from shutting fully. The same is true if the door seal is loose. The door does not tightly seal, alerting the refrigerator that the door is open and triggering the alarm light. Clean the seal if it is dirty or adjust it if it is loose. But if it is weak, replace the seal.

See also  How Old Is My GE Refrigerator? [Solved]

Additionally, the refrigerator may not be level. An improperly leveled Maytag refrigerator has functional issues, including alarm issues because the door does not fully shut. Use a level to check whether or not the unit is balanced and adjust the legs or rollers accordingly, as this article explains.

If nothing seems to work, there may be a faulty sensor in the refrigerator or loose wiring, causing the Maytag refrigerator alarm light to always blink. Also, the main control board may be malfunctioning, and since it governs the functions of the unit, it may be the source of the problem. Hire a qualified technician to check and fix the problem.

Note: These same steps apply if the door alarm keeps beeping. Closing the refrigerator doors should reset the alarm by stopping the beeping and turning off the light.

Maytag Refrigerator Temp Alarm Flashing – Quick Fix

Typically, the temp alarm goes off if the refrigerator’s internal temperature is higher than 48 degrees Fahrenheit or 9 degrees Celsius for more than an hour and thirty minutes. The same happens if the freezer’s internal temperature is higher than 15 degrees Fahrenheit or -9 degrees Celsius.

The most probable reason for the alarm to flash or go off is that the door is open or the refrigerator has stopped cooling. Therefore, check the door to ensure it is not open. Inspect the refrigerator contents and rearrange them if necessary to ensure the door fully closes. Wait an hour or two and check the internal temperature. The only time the temp alarm stops flashing is when the temperature drops or you press the alarm reset button on the control panel.

See also  JennAir Freezer Not Freezing [How to Fix]

However, if the temperature does not drop, check the settings. You may need to adjust them to accommodate the new development. Set the refrigerator and freezer temperatures as low as possible to enable fast cooling. Then, wait to see if there is an improvement. If there is none, schedule a service check. The same applies if the problem is from a faulty control board or loose sensor connections.

Maytag Refrigerator Temp Alarm Reset

To reset the temp alarm on a Maytag refrigerator, locate the temp alarm button on the control panel. Press it only one time and the audible alarm beeping stops. But give the unit time to cool until it reaches the set temperature before the light stops flashing.

Check out these other articles…

Refrigerator Does Not Turn Off [How to Fix]

How to Level a Maytag Refrigerator [Quick Guide]

Maytag Refrigerator Control [Issues Solved]

Maytag Refrigerator Door [How to, Problems & Solutions]

Maytag Refrigerator Modes [Detailed Guide]

Maytag Refrigerator Fan [Problems & Solutions]

Maytag Refrigerator Cooling [Problems, Solutions & Guide]

Maytag Refrigerator Door Alarm Not Working – Solved

Reset power to the refrigerator if the door alarm seems not to be working. Disconnect the refrigerator’s power cord from the wall outlet, leave it unplugged for at least one minute, and reconnect it to electric power. The process should reset settings and minor issues and restore the door alarm.

If that does not work, the problem may stem from loose wires, the control board, or a faulty sensor. However, these are not issues you can fix yourself; employ the services of a professional to troubleshoot possible causes why the alarm is not working and fix them.

Recap

The alarm on a refrigerator is a vital part of its functionality. It alerts you when the door is open or the temperature has risen beyond recommended levels for too long. The same applies to a Maytag refrigerator alarm. There are usually easy solutions to a refrigerator alarm problem such as properly closing the door and ensuring the temperature is correct.

See also  How to Replace a Whirlpool Refrigerator…[Detailed Guide]

However, if the problem persists, contact the Maytag service center to report the issue and request service. Alternatively, hire a certified and qualified appliance technician for further assistance.

Get Instant Help — Ask An Experienced Verified Appliance Technician

Need expert help? Click here to use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.