If you want to learn how to adjust your Amana refrigerator temperature or replace the temperature sensor, you are in the right place. In this article, we will show you how to do these step by step.
Table of Contents
How To Adjust Temperature On Amana Refrigerator
Below, we have listed the steps you need to follow in order to adjust your Amana refrigerator temperature…
Step 1: Make sure that your refrigerator is turned on.
Step 2: Open the door of the refrigerator.
Step 3: On the control panel, you should see “Fridge Temp” on the right side. Underneath this, there is a button. Press this button to adjust the temperature. Note that when the five dots are lighted up, the temperature is at its highest. And when only one dot is lighted up, it’s at its highest.
Step 4: Wait 24 hours for the refrigerator to fully adjust to the temperature you set.
The video below will give you a visual of how to adjust your Amana refrigerator temperature.
How To Replace Amana Refrigerator Temperature Sensor
You may want to replace the temperature sensor if your Amana refrigerator is too cold or too warm. Below, we have listed the steps you need to follow in order to replace your Amana refrigerator temperature sensor…
Step 1: Before you begin the repair on your Amana refrigerator, make sure to disconnect the power first. Do this by unplugging the power cord from the outlet or switching the circuit breaker off.
Step 2: Open the doors of the refrigerator.
Step 3: If you have any food in the refrigerator, take it out.
Step 4: Remove the shelves on the left door and set them aside.
Step 5: You will also need to remove the top shelf. Pull the shelf forward a bit, tilt it to the left, then remove it from the refrigerator.
Step 6: Set the shelf aside.
Step 7: On the left side of the refrigerator’s interior, there is a small plastic cover. To remove this cover, you will need a flat blade screwdriver. Insert the screwdriver into the small slot and carefully pry off the cover.
Step 8: Pull out the temperature sensor from the plastic cover.
Step 9: Set the cover aside.
Step 10: Get a new Amana refrigerator temperature sensor.
Step 11: If the connector on your new temperature sensor is different from the previous one, you will need to splice the wires. To do this, first remove the plastic wire sleeve from the temperature sensor.
Step 12: Carefully pull apart the temperature sensor wires a bit.
Step 13: Get a pair of wire strippers.
Step 14: Using the wire stripper, remove an eighth of an inch of the insulation on the first wire.
Step 15: Do the same with the other wire.
Step 16: Get the butt connectors and slide them onto the two temperature sensor wires.
Step 17: Crimp the wires to the connectors using a wire crimper.
Step 18: Go back to the refrigerator.
Step 19: Use the pair of pliers to cut the old temperature sensor. Make sure to cut as close to the sensor as possible.
Step 20: Pull apart the sensor wires in the fridge.
Step 21: Strip an eighth of the insulation on the two existing wires in the refrigerator.
Step 22: Take the new temperature sensor to the refrigerator and insert the two existing wires into the butt connectors.
Step 23: Crimp the connectors to secure them to the wires in the refrigerator.
Step 24: Get a heat shrink tube and slide it onto the temperature sensor.
Step 25: Using a heat gun, shrink the tube over the temperature sensor’s wires.
Step 26: Insert the temperature sensor back into the cover and push it in to secure.
Step 27: Reposition the cover on the refrigerator’s side wall and push it into place.
Step 28: Return the top shelf into the refrigerator and slide it into place.
Step 29: Also return the shelves on the door as well.
Step 30: Shut the doors of the refrigerator.
Step 31: Reconnect the power to the refrigerator by plugging the power cord to the outlet or switching the circuit breaker back on.
Watch the video below for a visual of how to replace the your Amana refrigerator temperature sensor.
Amana Refrigerator Temperature FAQ
What Temperature Should Your Amana Freezer Be?
This really depends on you. However, normally, the freezer’s temperature should be 0 degrees Fahrenheit.
Where Is Amana Refrigerator Temperature Control?
The temperature control for your refrigerator is on the control panel. Depending on your refrigerator model, it will be on the left or right. To access it, you will need to open the door of your refrigerator.