If you want to learn how to reset your Amana refrigerator water filter or replace it, you are in the right place. In this article, we will show you how to do these two things step by step.
Table of Contents
How To Change Amana Refrigerator Water Filter
Below, we have listed the steps you need to follow in order to change your Amana refrigerator water filter…
Step 1: First, disconnect the power to the refrigerator by unplugging the power cord from the outlet.
Step 2: Open the doors of the refrigerator.
Step 3: Pull forward on the plastic tab on the water filter cover in order to lower it. The water filter cover should be on the top wall of the refrigerator on the right side.
Step 4: Turn the water filter to the left in order to release it. A little water may spill at this point.
Step 5: Get a new Amana refrigerator water filter.
Step 6: Insert the bottom of the water filter into the housing and turn it to the right.
Step 7: Push the water filter cover shut.
Step 8: Shut the doors of the refrigerator.
Step 9: Plug the power cord back into the outlet.
Note: You might need to run water through the filter to rinse it out before drinking from it.
Watch the video below for a visual of how to replace an Amana refrigerator water filter.
If the steps above for replacing an Amana refrigerator water filter don’t work on your model, follow the steps listed below…
Step 1: Open the door of your refrigerator.
Step 2: The water filter should be on the upper right corner of the refrigerator’s back wall. Turn the filter counterclockwise to remove it.
Step 3: Get a new water filter for your Amana refrigerator.
Step 4: Screw the new water filter into place.
Step 5: Close the door of the refrigerator.
Watch the video below for a visual of how to replace the water filter in an Amana refrigerator.
How To Reset Water Filter On Amana Refrigerator
Before resetting the water filter on your Amana refrigerator, you will need to replace it. If you don’t replace it, the indicator light will still turn on again. Read the section above to learn how to replace the water filter in your Amana refrigerator. Once you have replaced the filter, hold down the “Filter Reset” button for three seconds.
If you don’t have this button on your refrigerator, hold down the “Water Filter” button for three seconds. If that also doesn’t work, hold down the “Max Ice” and “Max Cool” buttons for three seconds. If that still doesn’t work, press “Options” then select “Filter Reset”. After that, press “Measured Full”.
Amana Refrigerator Water Filter FAQ
Where Is The Water Filter On Amana Refrigerator Located?
The water filter should be on the upper back wall of the refrigerator’s interior somewhere on the right. If you don’t see the water filter there, it should be on the top wall. In order to access it, you will need to pull the cover down.