If you are looking for how to fix a Frigidaire refrigerator door handle, you have come to the right page. This article explains how to do this repair easily.
Table of Contents
How to Fix a Frigidaire Freezer Door Handle
Whether your Frigidaire freezer handle is loose or you need to replace it, here is an easy guide.
Step One
You are going to need a tape and a 3/32” Allen wrench to do this repair. So, get them together.
Step Two
Locate the set screws holding the freezer handle in place. You will find the screws on the inner side of the handle. Usually, two set screws mount the handle to the appliance.
Step Three
Use the tape to seal the door panel surface close to the screws. That will serve as protection against scratches.
Step Four
Use the Allen wrench to tighten the freezer door handle, turning the screws clockwise. However, if you want to replace the freezer door handle, unthread the screws securing the handle in place. Turn them counterclockwise to loosen them.
Step Five
Carefully remove the old door handle from its mounting plates. You may need to twist the handle before trying to pull it out from the mounting plates.
Step Six
Carefully align the holes on the new door handle to the mounting plates and fasten the screws. The screws should face downwards after tightening them. Do not forget to take off the protective tape afterward.
Step Seven
Ensure you tighten the new handle well. Open and close the freezer door to determine this. If the new door handle does not fit tightly, make the screws tighter.
If you would rather have a visual demonstration of how to fix the handle, here is a video…
Check out these other articles…
Frigidaire Refrigerator Making Noise [How to Fix]
Frigidaire Refrigerator Is Hot [How to Fix]
How to Clean a Frigidaire Refrigerator [Quick Guide]
Frigidaire Refrigerator Frost Buildup [How to Fix]
How to Replace Frigidaire Defrost Heater [Quick Guide]
How to Fix Frigidaire Refrigerator Door Handle
If your search is how to fix a Frigidaire refrigerator door handle, here are the steps you need to follow:
Step One
Use a 3/32” Allen wrench to fasten the screws securing the door handle. The screws are at the top and bottom inside corner of the refrigerator handle.
Turn the screws clockwise to tighten them. This will apply if the handle is loose and you are simply looking to tighten it.
However, if you want to replace the handle, jump to step 2.
Step Two
Use tape to protect the door panel surface around the handle to avoid any scratch on the body of the refrigerator.
Step Three
Turn the Allen screws that hold the door handle counterclockwise to loosen them. Then, take off the handle from the door.
Step Four
Take the new handle and align the hole on it to the mounting stud on the door. Hold it firmly, fix the Allen screws, and tighten them to secure the handle.
Remember that when tightening the screws, you turn them clockwise.
Step Five
Open and close the refrigerator door to ensure the new handle is tightly fitted. Otherwise, tighten it some more.
Finally, remove the protective tape.
This short video shows how to replace the door handle on a Frigidaire refrigerator…
You can also find a step-by-step guide on how to fix your appliance door handle on the user manual. If you cannot locate the manual, contact Frigidaire and supply them with your refrigerator model number. They can email a soft copy of the manual to you.
Get Instant Help — Ask An Experienced Verified Appliance Technician
Need expert help? Click here to use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.
