Is your Electrolux refrigerator not working? It can be frustrating to find that your trusty refrigerator no longer produces cold air or turns on when necessary. Learn how to fix this problem in this article.
Table of Contents
Electrolux Refrigerator Ice Maker Not Working – How to Fix
Check the following if the ice maker in your Electrolux refrigerator is not working:
1. Power Supply
Checking the ice maker’s power function is crucial. Sometimes, the power button is off or the metal shut-off arm is down in the On position. If either is the case, you must first turn on the ice maker before it can produce ice.
Other times, the arm is damaged or stuck in one position. If damaged, you can replace it without changing the ice maker assembly. But if stuck, check to see if ice has built around it and thaw it if that is the case. Otherwise, move items around the freezer so that the shut-off arm can freely move and not prevent the ice maker from working.
2. Temperature
Every refrigerator and freezer has a specific temperature setting for ice production. If the temperature is higher than this setting, the ice maker may not work. If it does, it will be slow. If your Electrolux refrigerator ice maker is not working and there is a power supply, check the temperature setting to ensure it is correct.
Typically, it should be at most 5 degrees Fahrenheit for the freezer section. But some models may keep freezing when the setting is up to 10 degrees Fahrenheit, although it is rare. If it exceeds 5 degrees, the ice maker stops producing ice until the temperature drops.
Therefore, check the setting and adjust it if necessary. If unsure, use a thermometer to test the temperature over 24 hours. If the reading on the display or the manual setting is not the same as the temperature reading on the thermometer, you have a cooling issue, and the ice maker will not work until it is resolved.
3. Water Supply
Next, check the water supply if the ice maker is on and functioning. Start with the main source; ensure the main water supply valve is fully open and not only partially open. Opening the valve only halfway may affect the water pressure and slow the water flow to the refrigerator. Always leave it fully open, especially if you usually have problems with the ice maker or water dispenser.
The next thing to check is the water line. Any obstructions within the line will affect how well the ice maker receives water. And if the water is slow, the ice maker may not work. Therefore, ensure the ice maker water line is not kinked, twisted, or obstructed by ice or debris. Flush the line with lots of water or use a hair dryer to clear ice if that is the case. Straighten the water line if twisted or kinked, loop it, and tape it to the back of the appliance.
4. Water Filter
If the water supply is not the problem, check the water filter. The best way to determine if the filter needs a replacement if unsure of the replacement date or has no filter indicator is to check the water pressure. While many Electrolux refrigerator models have water filter status lights to tell you when the filter needs a replacement, some models do not have this light. You will need to determine the change date yourself.
In such a case, try checking the water pressure with a pressure gauge. The device should tell you whether the water pressure is too low or too high. Typically, the pressure should not be lower than 20 psi. If lower, it will explain the ice maker problem, and one of the primary reasons is a clogged water filter.
A refrigerator water filter only lasts six months based on regular usage. Sometimes, you may have to change it before the end of six months, mainly if many people are using the water dispenser and ice maker. Other times, you can use it for longer than six months if you use it sparingly or depending on the filter type and quality.
However, since the average filter lasts only six months, it becomes clogged with impurities and contaminants the longer it stays in use. And if that happens, the water supply is restricted and the ice maker stops working due to a lack of water. Install a new compatible water filter for your Electrolux refrigerator model and see if it resolves the problem. It often does, but if not, go to the next possible solution.
5. Water Inlet Valve
The inlet valve is an electrically controlled component that connects the water from the main supply to the refrigerator. It regulates the amount of water flowing to the ice maker and dispenser per time to ensure no overflow or spillage.
But if the valve becomes defective or clogged with mineral deposits, it may not function as it should. This, in turn, affects ice production. Turn off the water supply and the refrigerator. Disconnect the inlet valve at the bottom back of the appliance and check it for clogging.
Months and years of regular use cause mineral deposits to clog the valve and restrict its capacity to function. Try cleaning it with warm soapy water to remove obvious stains and deposits. If that does not work, use vinegar to wipe it down.
Also, remove the screen filter and wash it. The filter is what removes dirt from the flowing water before it gets to the refrigerator so that it will become clogged over time.
However, if cleaning the inlet valve does not get it functioning again, get a multimeter and check the valve’s continuity and power supply. Replace it if there is a power supply and the water pressure is enough but the ice maker does not get water.
6. Ice Level Sensor
There is a sensor that detects the ice level in the storage bin whenever the ice maker produces ice. When the bucket fills up, the sensor detects it and informs the ice level control board, which shuts off the ice maker. That way, the ice maker does not keep making ice when there is no storage place.
But if the sensor is faulty, the control board cannot detect when the storage bin is full, so the ice maker keeps making ice. Other times, the sensor may trigger the ice maker to shut off when it has not yet produced ice. If that happens, the ice maker stops working.
Check the sensor and ice level control board. Test them with a multimeter to determine if they have continuity. If there is no continuity on the board but it is receiving power, the best solution is to replace it. And if the sensor does not produce resistance, replace it.
7. Ice Bucket
Incorrectly inserting the ice bucket after removing it can interrupt ice production. The ice storage bin or bucket must be correctly seated inside the freezer before the ice machine can resume operations. And if there are ice clumps in the bucket, the ice maker will not work.
Remove the bucket and check for clumps. Run hot or warm water into the bucket to clear the ice if any and ensure thorough rinsing. Then, follow the instructions in the user guide to insert it under the ice maker. Most ice buckets simply slide into the freezer under the ice bucket with a bit of wiggling. However, all models are not the same, so you need specific steps if you have trouble inserting it.
8. Main Control Board
The control board regulates the voltage provided to the ice maker. It also governs different refrigerator functions. If the ice maker stops working, the control board may be faulty or damaged. Turn off the refrigerator, locate the board, and inspect it.
You may have to replace it if there are any signs of a shorted part or burn marks. The same solution applies if the control board does not supply enough voltage to the ice maker.
9. Ice Maker Assembly
The last thing to check is the ice maker assembly. The problem may be with one or more components but may be challenging to find replacement parts. This is because ice maker parts are difficult to find individually. Replacing the entire ice maker assembly may be the best solution.
Electrolux Refrigerator Control Panel Not Working – Solved
Several issues can cause the control panel on any refrigerator to stop working, including an Electrolux refrigerator. However, the most probable reason is a faulty electronic control board. Before checking that, try resetting the refrigerator.
Disconnect it from the electric power by unplugging the power cord or turning off the circuit breaker. Wait about five to ten minutes before turning it on again. That is a soft reset and should fix minor issues with the refrigerator that may be causing the control panel problem.
However, if that does not work, try a hard reset. Turn off the refrigerator again and leave it unplugged for about thirty to forty-five minutes. Then, turn it on again and see if the control panel starts working. Most times, a reset like this fixes control panel issues if the control board is in good condition.
1. Showroom Mode
There is a possibility that the Showroom or Demo Mode is active, and if that is the case, the control panel will not work. This mode is used to display refrigerators in retail stores. The interior lights will work but nothing else will be active.
You may have accidentally activated this mode; on some models, Showroom will appear on the control panel display if that is the case. Follow the instructions in the user manual to exit this mode; there are specific instructions for doing this in different models.
2. Power Supply
You can also check the power supply to the refrigerator. If there is not enough voltage output to the appliance, the control panel will not function well, although the refrigerator lights will work. Check other appliances to see if there is a general power issue in the house.
If everything apart from the fridge works well, locate the main breaker box and check the breaker controlling the appliance. It may have tripped off or is shorted. If it has a problem, you will need an electrician to test and fix it.
It is best to use a professional for this repair to avoid causing further electrical damage or injury to yourself. Additionally, check the wall outlet for the refrigerator. It may be damaged or cannot produce enough voltage for the appliance.
3. Control Lock
The Lock feature disables the control panel and dispenser functions. It comes in handy when children are around to prevent accidental or constant dispensing. It also works when you need to clean the refrigerator, so that you do not dispense accidentally.
If the Lock is active, it will keep the control panel from working. You will also notice that the dispenser does not work. Therefore, check the lock button and see if it is lit or active. If unsure, use the manual to determine how to activate and deactivate the feature. Try it to see if the refrigerator responds; if it does, the problem is resolved.
4. Control Board
If all else fails, check the electronic control board. The board controls the control panel and dispenser functions, and if it becomes damaged, the control panel may stop working.
You may need professional assistance to determine its functionality, so hire an independent technician or contact the Electrolux Service Center to report the issue, request service, and buy a replacement control board.
Electrolux Freezer Not Working – Fixed
If you find that your Electrolux freezer is not working, the first thing to check is the power supply. Ensure the power cord is fully connected to the power outlet and the outlet produces enough voltage to power the freezer. Also, the breaker must be in good condition and there must not be wiring issues.
Freezers typically need higher and longer runtime to produce the cold air and ice required for them. That means they need more compressor power, which consumes more electricity than a regular refrigerator. Therefore, they must have a dedicated circuit to produce the required power.
If there is an issue with the circuit or if you connect other appliances to it, it may reduce the output to the freezer. But before going that far, check the power cord. Inspect the prongs to see if they are damaged or burnt. If damaged, replace the entire power cord.
Also, use a multitester to check the power output from the wall outlet to determine if it is up to the recommended value. If not, it may be a wiring issue, but replace the outlet and see if it resolves the problem. But if it persists after replacing it, the problem is with the wiring in the house. Only an electrician can fix it. Ensure you check the main breaker and turn it on if it is off.
1. Start Relay
But if the power supply is not the problem, check the start relay. The start relay is vital to how the freezer runs because it provides power for the compressor to start and function. A defective start relay may trigger the compressor to stop working, which causes the freezer not to work.
Testing the relay is easy; you may hear a clicking sound from the compressor area as the motor tries to start and run. Turn off the freezer and locate the compressor. You may have to wait a few minutes for the compressor to cool because it is usually hot after running for some time.
Next, detach the relay from the side of the compressor and shake it. If the relay rattles, it is defective and needs a replacement. But if not, use a multimeter to check for continuity and replace it if there is none.
2. Condenser Coils
The coils are also vital to the cooling function of any refrigerator or freezer. They appear as fins at the back of the freezer and dispel the heat from the appliance during the cooling cycle. The coils also help with the cooling function as they condense the refrigerant before it flows into the freezer.
However, dirty condenser coils compromise the freezer’s cooling capacity. The dirt insulates the coils, preventing the smooth dissipation of heat from the freezer into the atmosphere. Therefore, clean the coils thoroughly, removing dirt and debris on and around them. Ensure the freezer does not sit flush with the surrounding walls.
Instead, move it a few inches away from the walls behind it and at the sides if applicable. This encourages air circulation to prevent overheating, which can affect the compressor and cause it to shut down as a protective step. And if the compressor shuts down, the freezer will not work.
3. Main Control Board
The control board may malfunction and cause the freezer to stop working. The board governs all the freezer functions, and if there is any damage to it, nothing else will work, including the lights.
Consult the user manual to locate the control board on your Electrolux freezer. Inspect the board to check for burn marks or loose connections. If unsure, have a service agent or technician check and fix this part.
Electrolux Fridge Water Not Working – Quick Fix
Several issues with your fridge can cause the water to stop working. Check the following if you have this fridge issue:
1. Main Water Supply
The water supply should be the first thing you check. It is one of the primary reasons your Electrolux fridge does not produce water. Check the water supply valve at the main source to ensure it is fully open. Partially closing the valve can restrict the water flow and reduce the pressure.
It helps to turn it off and on again, this time opening it to the end. Give it a few minutes before checking to see if the fridge water works. If not, ensure the water pressure from the main source is high enough to push the water to the fridge. Low water pressure can restrict water flow and stop the dispenser from producing water.
2. Water Inlet Valve
The next thing to check is the water inlet valve. It provides the required water to the dispenser and ice maker by opening for a few seconds. Since it is electrically controlled, it can become faulty if the solenoid stops working. But the same can happen if the inlet valve becomes clogged with dirt.
Clean the valve with warm soapy water and a soft brush or use vinegar for the same purpose. A cleaning agent should remove most of the debris and allow the valve to work well again. But if that is not the case, testing the valve with a multimeter to check for power supply is crucial. Replace the water inlet valve if there is no continuity.
3. Water Tank and Line
The water tank or reservoir is part of the fridge that stores water for the dispenser. When you press the dispenser lever, the water typically flows from the tank to the dispenser and out of the fridge. But if the tank is frozen or damaged, it cannot produce water for the dispenser, which causes the fridge water to appear as if it is not working.
Also, the water line may be damaged or frozen, which produces the same result. Inspect the water tank or water line to ensure they are in good working condition. If frozen, turn off the fridge and give it time to unfreeze. And if the water line is kinked, straighten it and ensure nothing obstructs it. Fix these issues and see if the fridge water starts working. If not, replace damaged parts or check other possible issues.
4. Water Filtration
Your Electrolux fridge may have an interior water filter or work with an in-house water filter system. If it has a filter inside, replacing it every six months is crucial. But replacing it depends on how often you use the fridge water or ice maker. If you are a regular user, ensure you replace it every six months or earlier.
However, if the filter is old, it will affect the water pressure or stop the water from working. In such a case, you may notice only a trickle of water going into the fridge. So, replace the filter with a brand compatible with the fridge model. Ensure you follow the instructions in the user guide to install it correctly. Otherwise, you may have the same problem with incorrect installation.
If the filter your fridge uses is an in-house reverse osmosis filtration type, it can slow the pressure. If you suspect that is the case, consider removing the fridge from the filtration system and using an in-fridge water filter. Doing this usually improves the water supply from the fridge.
Other problems may stem from a dispenser part fault, and you may need a technician to check and fix it. However, follow the instructions in this article on the Electrolux refrigerator dispenser problems to troubleshoot and fix the problem.
Electrolux 3-Way Fridge Not Working on Gas – Solution
The first part to check is the thermocouple. The thermocouple is the part that regulates the amount of gas that goes to the fridge’s burner at any specific time. If it becomes defective, the best solution is to replace it. Attempting to fix and reuse the faulty thermocouple may cause more damage to the fridge.
But if the component works well, the gas line for the pilot light may be filled with air. This impedes the flow of gas to the pilot light and stops the fridge from working. You can reset the gas valves to clear the air if that is the case. Fortunately, that means simply resetting the fridge.
Disconnect it from the gas supply or electricity and allow it to sit without power for a few minutes. This should fix the valve problem. If your fridge is a newer model, you will find a power button to press to turn the appliance off and on again after some minutes.
If there is a leaking problem, the fridge will have trouble working on gas or electricity. The first sign of a leaking 3-way fridge is a strong ammonia smell. If you smell ammonia or have a strong unknown smell around the fridge, turn it off and call for professional assistance. Contact the Electrolux Service Center or hire an independent appliance technician for further help.
Electrolux Freezer Lights Not Working – Quick Fix
If you have a standalone freezer with light issues, the problem may be with the light assembly. Most freezers use LED lights and when one goes out, the entire light assembly will require a replacement. Other wiring issues can also cause light problems in your freezer, but replace the light assembly because it is easier to fix.
Ensure you buy the correct replacement LED light assembly for your Electrolux freezer model. Follow the instructions in the user guide or light packaging to replace the defective light. You must also ensure there is no moisture buildup around the light, which can cause it to stop working within a short period.
There is also the possibility that the light control board is defective. The board controls all the functions of the light assembly but it does not easily become defective. If the light assembly does not work after replacing it and there is no condensation issue, consider replacing the control board.
Electrolux Refrigerator Not Working – Fixed
Check the following if your Electrolux refrigerator does not work:
1. Power Supply
One of the most probable reasons a fridge stops working is a lack of power supply. It may be due to something small, like an incorrectly connected power cord or a kinked cable. Inspect the fridge’s power cord to determine if it is damaged. Kinking or twisting can restrict how well it works, so move the fridge and straighten the cord if it applies.
Ensure the prongs are fully connected to the power source. Unplug and replug the fridge to be sure, pushing it in all the way this time. If that does not get the fridge working again, check the prongs for signs of damage. They may be burnt or bent, preventing voltage from reaching the fridge. In such a case, replace the power cord.
Also, check the power outlet to see if it produces enough voltage to power the fridge. It may be damaged or have internal loose wires. If that happens, the wall outlet will no longer work as it should. You may need an electrician to check and fix the socket if it is faulty.
Additionally, ensure the breaker box is in good working condition. A faulty breaker may include a blown fuse, which affects how the fridge works. If that is the case, hire an electrician to check the breaker, house wiring, and other electrical connections for proper repairs.
2. Control Panel
Some Electrolux fridge freezers have an On/Off button on the control panel. This button enables you to turn the fridge on and off, and if you accidentally press it, the fridge stops working. If your appliance has this button, press it and see if the fridge responds. But if not, try resetting it manually to fix minor errors.
Turn off the fridge for about ten minutes and turn it on again. You can do this by unplugging it from the wall outlet or turning off the breaker that controls it. If the fridge does not work, try the next troubleshooting step.
3. Compressor
The compressor is the heart of the fridge and needs to work optimally to keep the appliance running. If the compressor fails, the fridge will stop working. The motor needs proper air circulation to function; if it overheats, the compressor shuts down as a protective measure.
Check to see if the fridge is flush against the surrounding walls. It should have a few inches of space around it to allow for free air movement. Also, check the condenser coils to see if they are dirty. A significant amount of dirt on the coils traps heat and causes overheating with the same result.
So, disconnect the fridge from the electric power and move it to create a space around it that allows proper air circulation. While doing that, inspect the coils to determine how dirty they are. Use a vacuum to clean them; a condenser coil cleaning brush also works if you have one.
Reconnect the fridge to the electric power and see if it comes on; listen to the compressor and fan when you do. If the compressor starts running and you hear the fan motor, the problem is resolved. Otherwise, the compressor may be damaged or have loose connections. Contact Electrolux to request assistance or hire an independent technician.
4. Control Board
The control board is easier and cheaper to replace when faulty or damaged. Before considering replacing the compressor, check the main control board. The board governs all the refrigerator functions and may stop it from working if damaged.
However, it is always easy to determine whether or not the board is faulty unless there are clear burn marks or loose connections. Since control boards are easy to misdiagnose, it is best to hire an experienced technician to check the one in your fridge and recommend a solution.
Electrolux Refrigerator Temperature Not Working – What to Do
If the temperature of your Electrolux refrigerator is not working, ensure you have the right setting. Check the user manual for steps to reset the temperature according to the recommended settings. Typically, the refrigerator section should be between 33 and 38 degrees Fahrenheit, and the freezer should be between 0 and 5 degrees Fahrenheit.
There is a little toggle room where you can adjust the temperature up or down, but you cannot exceed 40 degrees for the refrigerator and 10 degrees for the freezer. Otherwise, there may be cooling issues. But if the setting is correct, put a thermometer between two frozen foods and leave it for 24 hours.
Check the temperature afterward and see if it is higher than the setting on the refrigerator. If it is not, check for other possible problems. But if the temperature is higher than the setting, the problem may stem from dirty condenser coils, a weak door gasket, poor air circulation, wrong food storage and arrangement, or a malfunctioning compressor. Check out this article on an Electrolux refrigerator not cooling for more resources to troubleshoot and fix these parts.
Electrolux Refrigerator Water Filter Button Not Working – Quick Fix
Before trying to fix the filter button on your Electrolux refrigerator, ensure you replace the water filter. The filter must be replaced every six months or earlier if you use the ice maker and dispenser regularly. The filter button may appear as if it is not working if the filter is old.
Another possibility is that the button is stuck. Try prying it loose with a small putty knife or any other small sharp item. Cleaning it may also work if it is stuck because of dirt. Food and drink spillage or debris on fingers may affect the button, causing it to stick. If cleaning or prying the button loose does not work, you may need professional assistance.
Electrolux Fridge Light Not Working – Solved
Check the following parts if you find that the light in your Electrolux fridge is not working:
1. Light Bulb
The fix may be as simple as replacing the light bulb in the refrigerator. However, use the right type of bulb for the refrigerator model as well as the correct wattage. Otherwise, you may find the bulb not working.
2. Door Switch
The door switch acts as the light switch in most models. So, activate the switch on top of the door. It turns the light on or off whenever you open or close the door of the refrigerator. Second, take a multimeter to check the switch for continuity. If the switch shows no continuity even while activated, replace it.
3. Light Socket
If the bulb is working fine yet the refrigerator light is not coming on, then the socket may be defective. With a multimeter, check to see whether or not the socket is receiving electric power. If the socket is receiving power and the bulb is working yet the light won’t come on, replace the light socket.
4. Light Assembly
The entire assembly may be faulty, not just individual components. But before replacing the assembly, make sure to check every component and certify them to be in good working condition.
However, if you find a single component that is defective inside the assembly, you may still have to replace the entire assembly. It is difficult to find individual replacement parts, especially for older models.
5. Control Board
If all the other parts mentioned above are in good working condition, yet the light is not coming on, the control board may be defective. It controls the fridge functions and may stop the light from working when damaged. Check for damage on the board and replace it if there is. Otherwise, have a technician test the control board to determine its working condition.
Get Instant Help — Ask An Experienced Verified Appliance Technician
Need expert help? Click here to use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.
