The thermostat in a refrigerator controls the cooling system, ensuring it maintains the right temperature. This article is about how to replace a Maytag refrigerator thermostat.
Table of Contents
Where Is the Thermostat on a Maytag Refrigerator?
The thermostat in a Maytag refrigerator is found on the control panel inside the unit, in the fresh food compartment. Open the compartment and locate the panel; you may have to empty the top shelf in the refrigerator to have better access.
You will have to loosen and dismantle the control panel to find the thermostat. You may also find it under the refrigerator or on its back, depending on the model and type. Consult the user manual for the actual location. Also, ensure you turn off the refrigerator by unplugging it from the wall outlet or shutting off the circuit breaker.
Maytag Refrigerator Thermostat Testing
Once you find the thermostat in your Maytag refrigerator, with the refrigerator without electric power, turn the thermostat to the coldest temperature setting. Next, get a multimeter and set it to R X 1; place the multimeter’s probes on the terminals on the thermostat.
Now, check the display on the multimeter; you should see 0 if the thermostat is in good working condition. If the multimeter does not read 0, it may indicate the thermostat is defective. Since you cannot repair it, the only solution is to get a replacement thermostat.
However, if the multimeter displays 0, remove the thermostat from the refrigerator and set it to the warmest temperature setting. Next, put it in a cooling freezer and allow it to cool for about thirty minutes. Afterward, remove it and set the multimeter’s probes on the terminals again.
You should get an infinity reading from the thermostat if it is in good working condition. If you do, you are good to go, but if not, you need a new thermostat. You can check out this article on how to test a refrigerator thermostat for more details.
How to Replace a Maytag Refrigerator Thermostat
Disconnect the refrigerator from electric power and find the thermostat in the fresh food section. You can use the manual for the refrigerator locate or follow the guide in this article. To access the thermostat, you need to remove the covering panel; release the locking clips or loosen the screws securing the panel in place.
Keep the covering panel in a safe place and get a pair of needle-nose pliers. Pull the wire connectors off of the pin or spade terminals and loosen the clip securing the terminal in place. Then, remove it from the evaporator.
Slide the new thermostat in the place of the old one and secure the clip. Next, fix the two wires to the component’s terminals and put the covering panel back in place. Reconnect the refrigerator to electric power and test the thermostat.
Here is a video showing how to replace the thermostat in a Maytag refrigerator…
Check out these other articles…
Maytag Refrigerator Cooling [Problems, Solutions & Guide]
Maytag Refrigerator Making Ice [Problems & Solutions]
Maytag Refrigerator Smells [Proven Solutions]
Maytag Refrigerator Light [Problems, Solutions & Guides]
Maytag Refrigerator with No Water [Issues & Solutions]
Recap
If there is a cooling problem with your Maytag refrigerator and the condenser coils are not dirty, checking the thermostat is crucial. It is also crucial to know how to replace a Maytag refrigerator thermostat to help you do a quick job abd save money.
However, if you have repair issues, contact the Maytag Service Center to report the issue and request service. If that is not an option, hire an independent appliance technician for the job.
Get Instant Help — Ask An Experienced Verified Appliance Technician
Need expert help? Click here to use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.
