Find a lasting solution to Beko refrigerator error codes and messages by reading this article.
Table of Contents
Beko Refrigerator Error Codes – Quick Fix
Here are the error codes that are found in a Beko refrigerator and what to do about them:
1. E0
The sensor of the freezer section has an error if you see this error code displayed.
To fix this, remove the inside rear panel of the freezer to access the sensor. Disconnect the sensor sockets and test the sensor with a multimeter. The sensor is an open circuit if you see OL on the multimeter.
Buy a new sensor and test it to be sure it is not reading as an open circuit. Replace the old one with the new one and remount the back panel of the freezer.
This video shows how to do this repair easily and quickly…
2. E1
When you see this error code, know that the freezer defrost sensor has an error. Call a qualified technician or contact the Beko Service Center for help.
3. E3
This error code indicates that the sensor of the refrigerator compartment has an error. Fix it by contacting a service technician for help.
4. E4
If you see this error code, the defrost heater is not heating well enough to defrost ice or is not working.
5. E8
The sensor of the ice maker is malfunctioning when you see this error code. Change the sensor or have a professional repairman fix it for you.
6. E9
This error code signifies that the ice maker has failed. You will need to replace the ice maker or have a technician replace it for you.
7. 2
If you see this error code, there is a cooling malfunction in the refrigerator. It could be that the compressor or fan has failed, the door was open for too long, the sensor is not operating properly, or there is refrigerant leakage.
Let a qualified technician verify the fault and fix it for you.
8. 3
When you see this error code, you know that the heater is not working at all or is not working as it should. Replace the heater or the sensor of the refrigerator to fix this.
9. 4
The error code means that the sensor circuit is open. There could be a problem with the wire connections, or the sensor has shifted.
10. 5
The sensor circuit is shorted if you see this error code. The wires connecting the temperature sensors to the main control board could have disconnected, or one of the sensors is malfunctioning.
11. 6
The error code means that some of the buttons are depressed without coming up. It could be that the buttons are faulty or dirty.
12. 7
When you see this error code, be aware that the compressor is malfunctioning. Check for leakage of refrigerant, circulation system blockage or a faulty compressor.
Beko Fridge Freezer Error Code E13
If you see an E13 error code on your Beko fridge freezer, it means there is a problem with the freezer fan, also known as the evaporator fan. There may be an ice buildup or debris restricting the fan from running. If these do not apply, check for electrical or fan motor errors.
Disconnect the refrigerator from the electric power and test the control board. If there are loose connections, correct them to see if there is an improvement. And if the problem persists, check the fan behind the rear panel in the freezer section. Clear any ice around it with a hair dryer or by manually defrosting the refrigerator.
If clearing the ice does not solve the problem, you may have to replace the fan motor. And if that does not work, replace the control board.
Note: If you have a Beko 4-door refrigerator model, an E13 error code usually means an error in the sensor in the ice chamber. So, if the evaporator fan is not faulty, check the sensor and replace it if necessary.
Beko Fridge Freezer Error Code E15
The condenser fan may be restricted from blowing, and debris typically causes this error. If that is the case, you must clean the fan blade, motor, and other parts to fix the problem. Disconnect the fridge freezer from the wall outlet and move it to create space at the back.
Next, remove the access panel and inspect the fan. If dirt is on it, clean the blade and motor using a soft cloth and warm soapy water. Ensure you do not leave water on the electrical parts to avoid damage or accidental electrocution. Now, turn the blade by hand and see how well it works. If it is stiff, the motor’s bearings may be worn, and the motor needs a replacement.
You can also test the fan motor using a multimeter to see if there is continuity. Replace the motor if there is no continuity. Ensure you regularly clean the condenser area to prevent overheating and keep the fridge functioning optimally.
Check out these other related articles…
- Amana Refrigerator Error [Quick Fix]
- Samsung Refrigerator Error [How to Fix]
- Whirlpool Refrigerator Error [Solved]
- Sub-Zero Refrigerator Error [Quick Fix]
- LG Refrigerator Error [How to Fix]
- Maytag Refrigerator Error [Solution]
Quick Note: Repairing faults in your refrigerator saves you some time and money. But it is important to have a professional refrigerator technician take a look at the unit, ascertain the fault and fix it. If you get the repairs wrong, it could damage the unit beyond repair. Buying a new unit will cost you much more than the services of a repairman will cost you.
In addition to the above, regularly maintain the refrigerator so that minor faults will not arise. Change parts such as air and water filters when due. And connect the power cord of the refrigerator straight to a wall socket. Avoid using an extension for refrigerators.
Remember to unplug the refrigerator from the wall socket if you are going to be doing the repairs yourself. This is an important first step in repairing electrical appliances.
Get Instant Help — Ask An Experienced Verified Appliance Technician
Need expert help? Click here to use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.
