A Kenwood refrigerator leaking can be a bit of a nuisance. And if left unchecked can lead to heavy damage to the refrigerator. Therefore, this article will guide you on how to fix this problem without calling a technician.
Also, we will discuss what you can do when your Kenwood ice cream maker is leaking. And we will show you how to stop your Kenwood fridge water dispenser leaking problem.
Table of Contents
Kenwood Refrigerator Leaking – Reasons and Solutions
The following are the reasons your Kenwood refrigerator is leaking and the solutions:
1. Blocked Drain
The drain of your Kenwood refrigerator can get blocked by all sorts of food particles and debris. When this happens, ice and water will accumulate and then leak out of the refrigerator.
You can fix this by unclogging the blocked drain using lukewarm water. You can go about this by following the procedure below.
Unplug your refrigerator from the outlet to prevent any electrical shock while you work. You also need to turn off the water supply valve.
After that, pour lukewarm water down the drain hole. To further ensure that this method works, a pipe cleaner can be used to further unclog the blockage.
After doing this, plug in your refrigerator and continue to monitor it to see if the leaking has stopped.
If the above doesn’t work, then you have to remove the debris that might have collected at the drain pipe’s end. Therefore, you have to remove the valve at the drain pipe’s end and clean it with soap and hot water solution.
After you’ve done that, reinstall it and plug in your refrigerator. Do not fail to inspect the refrigerator for a while to see if the leaking problem has stopped.
2. Blocked Water Supply Line
This is another reason your Kenwood refrigerator might be leaking. You can also fix this easily by checking if the waterline has any kinks. If you find such, loosen them.
If the water line is damaged (tear) and is leaking, then you will need to replace it with a new one.
Watch this video to learn how to replace the water supply line:
If there is no tear, and all you find is a translucent clog, then this is a case of ice blockage. To fix this, unplug the refrigerator for about 2 hours and allow it to defrost. The ice will defrost and the blockage will be gone.
If your Kenwood fridge is freezing food, we recommend you read this article.
Kenwood Ice Cream Maker Leaking – What to Do
If your Kenwood ice cream maker is leaking, the best solution is to contact customer service or a qualified technician. This is because the repair of the leak is not something you can do yourself.
Besides, the blue gel that leaks out in such a case has to be replaced, and only authorized personnel can do so.
Check out these other articles…
Westinghouse Refrigerator Leaking [Solution]
Dometic Refrigerator Leaking [Quick Fix]
Westinghouse Refrigerator Dispenser Problems [Solutions]
Kenwood Fridge Water Dispenser Leaking – Quick Fix
Do the following to stop your Kenwood fridge water dispenser from leaking:
1. Replace the Vinyl Tubing
The vinyl tubing is responsible for connecting the water supply to the water dispenser. When this tubing gets damaged, water will begin to leak out of it.
To fix this, simply replace the tubing with a new one.
You can replace the vinyl tubing of your Kenwood fridge water dispenser by following the steps below:
Step 1: Unplug your refrigerator from the outlet and turn of the water valve.
Step 2: Remove the dispenser’s escutcheon to gain access to the tubing. Take the drip tray out and then loosen the screws that hold the escutcheon in place.
Step 3: Once the escutcheon is removed, disconnect the wire harness that is attached.
Step 4: The next step is to remove the dispenser assembly by loosening the screens that hold the assembly in place. Make sure you press the locking tab at the back when disconnecting the assembly.
Step 5: Use a needle-nose plier to pull the vinyl tubing out of the spout. Once you do this, the assembly is completely free and can be set aside.
Step 6: Disconnect the vinyl tubing from the kick plate at the bottom of the tubing. You’ll have to remove the kick plate first to access the tubing.
Step 7: Pull the tubing from the access you created at the dispenser assembly to remove the tube. You can use your pliers to aid you in removing it.
Step 8: Insert your new tubing down to the bottom of the refrigerator.
Step 9: Connect the tubing to the coupler at the bottom and then connect the top of the tubing to the spout.
Step 10: Cover the kick plate. Then reassemble and reconnect the dispenser assembly and escutcheon.
Step 11: Plug in your refrigerator and enjoy your water dispenser.
The video below is the visual explanation of the steps above which we recommend you watch to understand the steps better.
2. Release Trapped Air from the Water Line
Another reason your Kenwood refrigerator water dispenser might be leaking water is that air is locked in in the waterline. When this happens, water will begin to leak from the opening of the dispenser as a result of the air pressure.
You can release the trapped air by emptying the water tank. To do this, all you need is a large cup and a bit of patience. Then press down the trigger to release water into the cup. Continue this for a maximum of about three minutes.
During this period, the air in the tank should have been removed. And the leaking problem will be fixed provided that this is the problem.
3. Replace the Water Valve
If your water valve becomes faulty which is common due to usage wear-out, then you will experience leakage from your dispenser. The solution to this issue is simply to replace the water valve.
Follow the steps below to replace the water valve of your Kenwood refrigerator:
Step 1: Unplug the refrigerator and turn off the water supply valve.
Step 2: Remove the water supply line by loosening the nuts that hold it in place. Make sure you keep a towel underneath the valve to collect water.
Step 3: With the aid of a Phillips screwdriver, loosen the screws holding the back panel.
Step 4: Loosen the screws that fasten the mounting bracket to the refrigerator’s frame.
Step 5: Free the wire harness by pressing the locking tab. Then pull off the wire harness from the valve. After that, separate the water supply line from the water valve assembly.
Step 6: Fit in the new water valve assembly.
Step 7: Restore the wire harness to its original position and connection.
Step 8: Fasten the new valve on the mount by fitting the screws back in place.
Step 9: Cover the back panel.
Step 10: Fix the water line back in place and connect it to the water valve. Then turn on the water supply valve.
Step 11: Plug your refrigerator back into the outlet.
4. Pour out Water from the Catch Pan
The catch pan is found under the dispenser and is used to collect excess water that drips or pours from the glass cup. If the water in this pan is left for a long time without being emptied, one might mistake it for leakage.
So, to solve this, take out the catch pan and pour out the water. We recommend that you do this often to prevent having an overflowing pan.
Conclusion – Kenwood Refrigerator Leaking
At this point, we believe you know how to fix your Kenwood refrigerator leaking problem. We also believe you know what to do concerning your Kenwood ice cream maker that is leaking and your Kenwood refrigerator water dispenser leaking problem.
If you find any of the steps difficult, you can reach out to our appliance technicians and you’ll be given all the help you need.
And if the problem persists, you could just get a new refrigerator like the one below.
Get Instant Help — Ask An Experienced Verified Appliance Technician
Need expert help? Click here to use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.
